Entropic effect implication for change in polymer coils swelling state in the demixing enthalpy recovery of aqueous poly(vinyl methyl ether) solutions

Time‐dependent demixing enthalpy recovery behavior of aqueous poly(vinyl methyl ether) (PVME) solutions exhibits distinct recovery characteristics in three concentration regions. The absence of recovery behavior below a water concentration of 38.3 wt % indicates that the PVME coil is in a globular state. The typically sigmoidal recovery behavior of demixing enthalpy above 38.3 wt % is ascribed to the reswelling of the collapsed polymer coils induced by the entropic effect. The increase in difference between the upper and lower limits indicates the continued swelling of the PVME coils. Above 65 wt %, a dominant diluting effect can be observed, and a much longer phase separation time is needed to reach the expected lower limit. In contrast, the recovery of demixing enthalpy in a wide range of water concentration (from 38.3 to 90 wt %) exhibits the same feature. The infrared spectroscopy results are in agreement with the above macroscopic differential scanning calorimetry results. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 142–151     

Comparative pharmacokinetic study of four major bioactive components after oral administration of Zhi‐Zi‐Hou‐Po decoction in normal and corticosterone‐induced depressive rats

A highly selective and efficient LC–MS/MS method was developed to determine the plasma concentration of magnolol, hesperidin, neohesperidin and geniposide following oral administration of Zhi‐Zi‐Hou‐Po decoction in normal and depressed rats. Plasma samples were pretreated by protein precipitation with methanol. Chromatographic separation was performed on an XTerra^® MS C₁₈ column using a gradient elution with a mobile phase composed of acetonitrile–0.1% aqueous formic acid. The proposed method was validated to be specific, accurate and precise for the analytes determination in plasma samples. The calibration curves displayed good linearity over definite concentration ranges for the analytes. The intra‐ and inter‐day precision of the proposed method at three different levels were all within <11.13% and the relative errors ranged from ?8.46 to 8.93%. The recovery of the four compounds ranged from 82.72 to 89.08% and no apparent matrix effect was observed during sample analysis. After full validation, the established method was successfully applied for comparing the pharmacokinetics of four components between normal and depressed rats. The results showed that the AUC and C_max of four analytes in depressed rats were significantly different from those in normal rats and might provide helpful information to guide the clinical use of Zhi‐Zi‐Hou‐Po to treat depression.     

Closed‐form approximations for spread options in Lévy markets

We provide new closed‐form approximations for the pricing of spread options in three specific instances of exponential Lévy markets, ie, when log‐returns are modeled as Brownian motions (Black‐Scholes model), variance gamma processes (VG model), or normal inverse Gaussian processes (NIG model). For the specific case of exchange options (spread options with zero strike), we generalize the well‐known Margrabe formula (1978) that is valid in a Black‐Scholes model to the VG model under a homogeneity assumption.     

Simultaneous separation and determination of seven isoflavones in Radix Puerariae by capillary electrophoresis with a dual cyclodextrin system

A simple, comprehensive and efficient capillary electrophoresis method using a dual cyclodextrin system was developed for the simultaneous determination of seven isoflavones (3′‐methoxypuerarin, puerarin, 3′‐hydroxypuerarin, ononin, daidzin, daidzein and genistin). Baseline separations of the seven isoflavones were achieved within 11 min with the running buffer consisting of 35 mm sodium tetraborate, 9.0 mm sulfobutylether‐β‐cyclodextrin and 30 mm α‐cyclodextrin at pH 9.34, and peaks were detected at 254 nm. Other separation parameters included the separation voltage for 15 kV and the working temperature for 25°C. Under the optimum conditions, good linearities were obtained with linear correlation coefficients of seven isoflavones of 0.9978–0.9992. The limits of detection and the limits of quantification were 0.7–2.9 and 2.5–9.5 μg/mL, respectively. Excellent precision and accuracy were obtained. The intraday and interday precision ranged from 0.7 to 2.0% and from 0.8 to 1.9%, respectively. The recoveries of seven analytes were from 97.7 to 103.1%. This method was successfully applied to determine the seven analytes in Radix Puerariae and its preparations.     

Wolfe-Type Duality for Mathematical Programs with Equilibrium Constraints

Acta Mathematicae Applicatae Sinica, English Series - This paper considers the mathematical programs with equilibrium constraints (MPEC). It is well-known that, due to the existence of equilibrium...     

Correlations between microstructure of α‐row nuclei and polymorphism of shear‐induced iPP/carbon fiber cylindrite

Herein, we reported the formation mechanism of hybrid crystalline (cylindrite) in isotactic polypropylene (iPP)/carbon fiber (CF) via pulling a CF within the iPP melt. The α‐row nuclei layer closely attached to the surface of CF acts as a self‐nucleation site, rather than a heterogeneous nucleation one, to grow cylindrites. As a result, the polymorphic feature of iPP/CF cylindrite is significantly influenced by the microstructure of α‐row nuclei. With decreasing crystallization temperature (T_c), the polymorphic cylindrite changes from pure α‐form to mixed α‐/β‐form and to β‐rich form. The main characteristics of this change include: (a) the outlines of α‐row nuclei layer correspond to wave‐like, saw‐like, and straight lines; (b) the orientation level of iPP molecules in the α‐row nuclei layer become higher; (c) the α‐lamellae rearrange from loose to compact; and (d) the distance between the growth sites of β‐sectors and the surface of CF is evidently longer than in the case of α‐sectors. Moreover, this study provides a guideline for developing the interfacial enhanced iPP/CF composites through manipulation of polymorphic structure in cylindrites. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 368–377     

Effect of quality control on the proliferation of the extract from Taraxacum mongolicum Hand.‐Mazz. in Lactobacillus plantarum

In recent years, the fingerprint of high‐performance liquid chromatography has been extensively applied in the identification and quality control of traditional Chinese medicine. It can be a potential protocol for assessing the authenticity, stability and consistency of traditional Chinese medicine and guaranteeing the expected biological activity. In this paper, a method using high‐performance liquid chromatography to identify and control the quality of the extract of Taraxacum mongolicum Hand.‐Mazz. (TME) was established. With this method, the correlation coefficients of the similarity of 10 batches were ≥0.994. The TME displayed a steady proliferative effect in Lactobacillus plantarum. In brief, this study successfully built a reliable, simple and efficient method to control and confirm the quality and the stability of biological activity of the TME.     

Copper-Catalyzed Trifunctionalization of Alkynes: Rapid Formation of Oxindoles Bearing Geminal Diboronates

A copper-catalyzed trifunctionalization of alkynes that provides rapid access to oxindoles bearing a geminal diboronate side chain, highlighted by the simultaneous formation of one C−C bond and two C−B bonds, is reported. This new reaction features simple reaction conditions (ligand-free catalysis), a general substrate scope, and excellent chemoselectivity. Mechanistic study revealed a reaction sequence constituted by, in the order, borylation, intramolecular cross-coupling, hydroboration, which has been rarely documented.     

Free boundary problem for a fully nonlinear and degenerate parabolic equation in an angular domain

This paper concerns with the problem of how to running an insurance company to maximize his total discounted expected dividends. In our model, the dividend rate is limited in $[0,M]$ and the company is allowed to transfer any proportion of risk by reinsuring. So there are two strategies which we call dividend strategy and reinsurance strategy. The objective function and the corresponding optimal two strategies are the solution and the two free boundaries of the following Barenblatt parabolic equation

$v_t?\underset{0\le a\le 1}{\max }?(\frac{1}{2}{a}^2{\sigma }^2{v}_{xx}+a\mu v_x)+cv?\underset{0\le l\le M}{\max }?[(1?v_x)l]=0$

under certain boundary conditions on an angular domain

$Q_T=\{(x,t)|0<x<Mt,0<t\le T\}.$

The main effort is to analyze the properties of the solution and the free boundaries to show the optimal decision for the insurance company.